Juniper ACX7509 FPC and Ports Positioning
Transcript
0:00 some basic rules must be respected
0:02 regarding the utilization of fpcs in
0:05 scx-7509 chassis the slots 1 and 5 use
0:08 fast speed connections 50 gig service
0:10 while the other slots are using lower
0:12 speed links up to 25 gig the FPC 4cd
0:16 400d can only be used in the slots 1 and
0:19 5.
0:20 fpc16cs can be inserted everywhere but
0:23 only in full capacity in one and five
0:24 used in other slots only 8 ports will be
0:27 activated note that in slot 7 one port
0:30 is used for timing features even if you
0:32 don't configure them breakout mode in
0:34 16c is not supported in slots 1 and 5.
0:37 in other slots when you configure a
0:39 channelized port the adjacent Port must
0:40 be channelized too or unused finally the
0:43 fpc20y with SFP ports can be used
0:46 everywhere but 50 gig is available in
0:48 slots 1 and 5 only and 1 Gigi only in
0:51 slot zero two three four six and seven
0:53 that's a lot for one minute but it's not
0:55 so complicated take a look at the tech
0:57 post Link in the description for more
0:59 details